• Strength Shop USA
  • Strength Shop Ireland

Bars

Grid List

Set Descending Direction

1-20 of 47

Page:
  1. 1
  2. 2
  3. 3
  1. Strengthshop Original 2028 Olympic Bar
    €129.99

    Olympic Bar with black zinc coated shaft and steel bushings. This bar is arguably the best value for money in this price category of barbells on the market. It is our entry level training barbell, ideal for home/garage gyms and light commercial use. This bar was designed to be an entry level or beginners weight training bar and fits the bill perfectly when you're looking for a bar on a budget. It is Olympic standard size and weight (220 cm and 20 kg) and is made of straight steel with 50 mm sleeves on the ends, and a 28 mm diameter shaft, which is rare for a bar in this price range. The Black Oxide Bar is perfect for static lifts such as Squats, Deadlifts and Presses. Rated to: 250 kg Diameter: 28 mm Weight: 20 kg Length: ca. 220 cm Length between sleeves: 131 cm Spacing between rings: 810 mm PSI: 186 k 50 mm sleeves Length of each sleeve: 40 cm With end caps. Relatively sharp knurling and excellent sleeve spin. Learn More
  2. 2029 Strengthshop Power Bar
    €149.99

    2029 Strengthshop Power Bar A power bar specification version of our popular 2028 Original barbell. Comes with black zinc coating and steel bushing. We dont all deadlift 400kg but would still like to train with Power bar specification barbells. The 2029 Power Bar is an economical alternative for large section of lifters to whom more expensive power bars aimed at very heavy lifting might be an overkill or simply too expensive. Olympic standard size (220cm long, 50mm loading sleeves, 20kg weight) Straight steel 29mm diameter shaft. Made for static lifts such as squat, bench and deadlift. Rated to: 260 kg Diameter: 29 mm Weight: 20 kg Length: ca. 220 cm Length between sleeves: 131 cm Spacing between rings: 810 mm PSI: 185 k 50 mm sleeves Length of each sleeve: 40 cm With end caps. Relatively sharp knurling and excellent sleeve spin for bushing technology. Learn More
  3. Olympic Webbing Loading Pin, 45 cm
    €19.99

    Webbing loading pin to hold 50mm Olympic plates as an easy to use and light to transport alternative to steel loading pins. Made from strong webbing material to withstand everything up to belt squat loads. A loading pin is handy for a variety of excercises, and can be attached to dip/pull up belts, variety of grip tools like rolling handles, cable work and so on. Loading pin length: 45 cm For 50mm plates Strong webbing material. Learn More
  4. Strengthshop Original 1525 Women`s Olympic Bar
    €129.99

    This is the women`s standard size version of our best selling Strengthshop Original 2028 barbell. A great entry level barbell mainly aimed at static power lifts such as squats, bench and deadlift. It has an excellent sleeve spin and could be used for explosive lifts as well, though dropping with weights is not recommended (for this purpose please see spring steel women`s weightlifting barbells). Measurements are based on women`s/junior standard weightlifting measurements, with 25 mm shaft thickness and 15 kg weight. Technical specification: Rated to: 180 kg Weight: 15 kg Length: 201 cm Shaft diameter: 25 mm Length between sleeves: 130 cm Distance between rings: 87.3 cm Shaft: straight steel Surface finish: black oxide coated Loading sleeve: 50 mm Length of sleeves: 35.5 cm Sleeve spin: moderate End caps: yes Ideal for: static power lifts such as squats, deadlifts, press Learn More
  5. BASTARD POWER BAR WITH BLACK CHROME SHAFT
    €299.99

    Strengthshop Bastard Power Bar World Class Powerlifter Delroy McQueen on the Bastard Power Bar "The Bastard Bar is awesome. I have been using it in all my training sessions instead of the Texas power bar now. It handles the bigger weights on the deadlift very well!". Check him doing reps with 320kg on Squat & Deadlift here; -29mm Nickel/Phosphorus plated, Sprung Steel Shaft -131.5cm Length of shaft between sleeves -15cm centre knurling -40.5cm loadable length of sleeve -2" diameter sleeve, suitable for Olympic Plates Ideal for Powerlifting - Squats, Bench and Deadlift, and general gym use. Weight: 20kg Length: 2.2m Shaft: Sprung Steel Shaft Diameter: 29mm Distance Between Rings: 810mm Centre Knurling? Yes Knurling Type: Coarse Sleeve Type: Brass Bushings Recommended Max Load/Rating: 1500lbs static rating, 205K PSI Tensile strength. Max suggested load - 340kg Deadlift, 300kg Squat Warranty: 3 Year Performance Warranty This bar comes with Strength Shop 3-Year performance warranty. Video of the bar being tested with 400kg; Learn More
  6. STRENGTHSHOP BASTARD SQUAT BAR
    €349.99

    Our Bastard Squat Bar is the product of extensive testing, development and cooperation between elite powerlifters and our own expert product development team. We believe that the result is the ideal squat bar that will handle those big squats with ease. Featuring: Deep coarse knurling throughout the bar with extra wide center knurling to ensure a solid grip on your back during the squat. A 32mm diameter sprung steel shaft, which makes this bar thicker than a normal power bar. The thicker shaft is better suited for squats and dramatically increases the strength of the bar. Due to this added shaft diameter, the bar weighs in at 25 kg. Extra long sleeves with a loadable length of 46 cm, allowing you to fit more weight on the bar compared to standard olympic barbells. A chemical plated finish on the bar, which looks as good as it performs. All these small features add up to make this a fantastic bar that is an absolute pleasure to squat with! Bar Specs: Weight: 25 kg Length: 2.47 m Shaft: Sprung Steel Shaft Diameter: 32 mm Center Knurling: Yes Knurling Type: Coarse and Wide Sleeve Type: Brass Bushings Recommended Max Load Rating: 1500 lbs static rating, 205K PSI tensile strength. Max suggested load - 450 kg squat Warranty: 3 year performance warranty. Learn More
  7. Strengthshop Bastard Deadlift Bar
    €349.99

    A great new addition to our range, the Bastard Deadlift Bar! Longer than your average barbell, and more 'flex' than a power bar, as well as no centre knurling and a 27mm shaft. The sleeves have been designed with simplicity in mind to reduce the need for maintenance and to increase robustness. Several Powerlifting federations use a Deadlift Bar in competition, so make sure you are training Deadlift with the correct type of barbell. Hardened Chrome Plating. Check out Delroy McQueen Pause Deadlifting 350kg with this bar! Weight: 20kg Length: 2.3m Shaft: Sprung Steel Shaft Diameter: 27mm Distance Between Rings: 885mm No Centre Knurling Knurling Type: Mild Sleeve Type: Brass Bushings Recommended Max Load/Rating: 1500lbs static rating, 205K PSI Tensile strength. Max suggested load: 400kg Warranty: 3 Year Performance Warranty This bar is designed to be used for deadlifts only. This bar is not suitable or covered for any other static or olympic lifts. Learn More
  8. Hardened Chrome Riot 2.0 Weightlifting Bar - No centre knurling
    €249.99

    Price incl. VAT, excl. shipping Introducing our new and improved Riot 2.0 Hardened Chrome Riot 2.0 Weightlifting Bar! With a high quality finish and details, strong chrome coating, strong alloy steel spring steel shaft, this is our best mid range weightlifting bar yet! The sleeve spin is smooth and steady with 4 needle bearings per sleeve, 8 in total. Its not fast and aggressive like barbells purely for olympic weightlifting, but with sleeves built to withstand daily heavy use in multiple disciplines, from functional training to powerlifting. Its a beautiful bar, with a lot of attention to detail in the sleeve collar aesthetics, and the quality of the finish on both the shaft and the sleeves. The sleeves have a light knurling for added friction for the plates. Olympic standard barbell Length: 220cm Thickness of the shaft: 28mm, high quality alloy spring steel Length of the shaft without sleeves: 1312mm With dual markings for both weightlifting and powerlifting No centre knurling Sleeve technology: 4 needle bearings per sleeve Lightly knurled sleeve finish Weight of the barbell: 20kg Weight tolerance +/- 50 grams Coating: Hardened Chrome Recommended for: multi purpose barbell for weightlifting, powerlifting and functional training Recommended maximum load: 280kg (for higher powerlifting use, please see our power bars), 1500lbs static rating, 205K PSI Tensile strength Warranty: 3 Year Performance Warranty Learn More
  9. Hardened Chrome Riot 2.0 Weightlifting Bar - With Centre Knurling
    €249.99

    Price incl. VAT, excl. shipping Introducing our new and improved Riot 2.0 Hardened Chrome Riot 2.0 Weightlifting Bar with centre knurling! With a high quality finish and details, strong chrome coating, strong alloy steel spring steel shaft, this is our best mid range weightlifting bar yet! The sleeve spin is smooth and steady with 4 needle bearings per sleeve, 8 in total. Its not fast and aggressive like barbells purely for olympic weightlifting, but with sleeves built to withstand daily heavy use in multiple disciplines, from functional training to powerlifting. Its a beautiful bar, with a lot of attention to detail in the sleeve collar aesthetics, and the quality of the finish on both the shaft and the sleeves. The sleeves have a light knurling for added friction for the plates. Olympic standard barbell Length: 220cm Thickness of the shaft: 28mm, high quality alloy spring steel Length of the shaft without sleeves: 1312mm With dual markings for both weightlifting and powerlifting With centre knurling Sleeve technology: 4 needle bearings per sleeve Lightly knurled sleeve finish Weight of the barbell: 20kg Weight tolerance +/- 50 grams Coating: Hardened Chrome Recommended for: multi purpose barbell for weightlifting, powerlifting and functional training Recommended maximum load: 280kg (for higher powerlifting use, please see our power bars) 1500lbs static rating, 205K PSI Tensile strength Warranty: 3 Year Performance Warranty Learn More
  10. Riot Pure Needle Bearing Weightlifting Bar With Center Knurling
    €279.99

    As an Olympic Weightlifter you need a dedicated barbell with IWF specifications and nothing else. Here´s where our Riot Weightlifting Barbell comes in - a high quality spring steel barbell with IWF specifications at an affordable price! Most barbells at this price range are dual-purpose powerlifting and weightlifting bars. This forces the pure weightlifter to either settle for hybrid markings and sluggish spin, or choose a much more expensive weightlifting specific barbell. No more compromises! Our Riot Weightlifting Barbell is receiving great feedback from weightlifters in testing. Despite its comparatively low price tag, it´s a great training bar that you´ll be happy to use day in day out. The knurling is slightly harder than that of a standard "training bar" level. Just enough to offer good grip without tearing up your hands. It has good medium level whip – more than the average hybrid weightlifting barbell. The spin is not as fast and aggressive as some more expensive models, but fast enough to get you under the bar during cleans and snatches. Specs: Overall Length: 220cm Shaft Thickness: 28mm, high quality alloy spring steel Shaft Length Excluding Sleeves: 1312mm Coating: Hardened Chrome Markings: 91cm, as specified by IWF Centre Knurling: Yes Sleeve Technology: 4 needle bearings per sleeve Sleeve Finish: lightly knurled Weight: 20kg Weight Tolerance +/- 50 grams Recommended Maximum Load: 280kg Static Rating: 1500lbs Tensile Strength: 205K PSI Recommended for: Olympic Weightlifting Warranty: 3 Year Performance Warranty Learn More
  11. Strengthshop WL28N Bastard Bar - no centre knurling with black chrome shaft
    €229.99

    We often get asked which bar is suitable for powerlifting, weightlifting, and functional training. We have now developed the StrengthShop Bastard Bar, a bar which combines many features from each type of bar and brings them into one. Each sleeve in these bars consist of one needle bearing, two ball bearings, and one brass bushing. Lightly grooved sleeves. Black chrome plating. Quite a 'flexy' shaft, sharp knurling, and great free spinning sleeves. Weight: 20kg Length: 2.2m Shaft: Sprung Steel Shaft Diameter: 28mm Distance Between Rings: 810mm and 910mm Centre Knurling? No Knurling Type: Medium Sleeve Type: Needle Bearings, Brass Bushings & Ball Bearings Max Load/Rating: 1500lbs static rating, 205K PSI Tensile strength Independent reviews of the bar; "The bar is lovely, nice knurling, good flex and spin! In that price range I've used rogue bars and the again faster klokov bar, even used the Taishan bar, and this bar to me feels the most comfortable and is definitely the most versatile of the lot! Super pleased with it! Will definitely point people towards this bad when asked! It's one of the best if not the best bar for crossfit that I've used, and as great a quality that rogue bars are, I would definitely take the bastard bar over the Ohio or rogue bar!" - Jordan - July 2015 Learn More
  12. Strengthshop WL28N Bastard Bar, 20 kg -with centre knurling
    €229.99

    We often get asked which bar is suitable for powerlifting, weightlifting, and functional training. We have now developed the StrengthShop Bastard Bar, a bar which combines many features from each type of bar and brings them into one. Each sleeve in these bars consist of one needle bearing, two ball bearings, and one brass bushing. Lightly grooved sleeves. Black chrome plating. Quite a 'flexy' shaft, sharp knurling, and great free spinning sleeves. Weight: 20kg Length: 2.2m Shaft: Sprung Steel Shaft Diameter: 28mm Distance Between Rings: 810mm and 910mm Centre Knurling? Yes Knurling Type: Medium Sleeve Type: Needle Bearings, Brass Bushings & Ball Bearings Max Load/Rating: 1500lbs static rating, 205K PSI Tensile strength Independent reviews of the bar; "The bar is lovely, nice knurling, good flex and spin! In that price range I've used rogue bars and the again faster klokov bar, even used the Taishan bar, and this bar to me feels the most comfortable and is definitely the most versatile of the lot! Super pleased with it! Will definitely point people towards this bad when asked! It's one of the best if not the best bar for crossfit that I've used, and as great a quality that rogue bars are, I would definitely take the bastard bar over the Ohio or rogue bar!" - Jordan - July 2015 Learn More
  13. Strengthshop WL28N Bastard Bar, 20 kg -with centre knurling
    €229.99

    We often get asked which bar is suitable for powerlifting, weightlifting, and functional training. We have now developed the StrengthShop Bastard Bar, a bar which combines many features from each type of bar and brings them into one. Each sleeve in these bars consist of one needle bearing, two ball bearings, and one brass bushing. Lightly grooved sleeves. Nickel/Phosphorus plating. Quite a 'flexy' shaft, sharp knurling, and great free spinning sleeves. Weight: 20kg Length: 2.2m Shaft: Sprung Steel Shaft Diameter: 28mm Distance Between Rings: 810mm and 910mm Centre Knurling? Yes Knurling Type: Medium Sleeve Type: Needle Bearings, Brass Bushings & Ball Bearings Max Load/Rating: 1500lbs static rating, 205K PSI Tensile strength Independent reviews of the bar; "The bar is lovely, nice knurling, good flex and spin! In that price range I've used rogue bars and the again faster klokov bar, even used the Taishan bar, and this bar to me feels the most comfortable and is definitely the most versatile of the lot! Super pleased with it! Will definitely point people towards this bad when asked! It's one of the best if not the best bar for crossfit that I've used, and as great a quality that rogue bars are, I would definitely take the bastard bar over the Ohio or rogue bar!" - Jordan - July 2015 Learn More
  14. STRENGTH SHOP NEMESIS BAR - WITH CENTRE KNURLING - BLUE

    Regular Price: €299.99

    Special Price €229.99

    Introducing the Strength Shop Nemesis Bar - our second coloured barbell we have added to the range! The blue fortified resin shaft brings this bar to life! This bar is a great multi function hybrid bar which is suitable for powerlifting, weightlifting, and functional training. The Nemesis Bar combines many features from each type of bar and brings them into one. Each sleeve in these bars consist of one needle bearing, two ball bearings, and one brass bushing. Lightly grooved sleeves. Blue fortified resin shaft, with black fluoride sleeves, making this bar not only a treat to look at, but also to use. Quite a 'flexy' shaft, sharp knurling, and great free spinning sleeves. Weight: 20kg Length: 2.2m Shaft: Sprung Steel Shaft Diameter: 28mm Distance Between Rings: 810mm and 910mm Centre Knurling: Yes Knurling Type: Medium Sleeve Type: Needle Bearings, Brass Bushings & Ball Bearings Max Load/Rating: 1500lbs static rating, 205K PSI Tensile strength. Max suggested load - 120kg for Clean & Jerk / Snatch, 250kg for Squat/Deadlift Warranty: 3 Year Performance Warranty Learn More
  15. STRENGTH SHOP NEMESIS BAR - WITH CENTRE KNURLING - RED

    Regular Price: €299.99

    Special Price €229.99

    Introducing the Strength Shop Nemesis Bar - our first coloured barbell we have added to the range! The red fortified resin shaft brings this bar to life! This bar is a great multi function hybrid bar which is suitable for powerlifting, weightlifting, and functional training. The Nemesis Bar combines many features from each type of bar and brings them into one. Each sleeve in these bars consist of one needle bearing, two ball bearings, and one brass bushing. Lightly grooved sleeves. Red fortified resin shaft, with black fluoride sleeves, making this bar not only a treat to look at, but also to use. Quite a 'flexy' shaft, sharp knurling, and great free spinning sleeves. Weight: 20kg Length: 2.2m Shaft: Sprung Steel Shaft Diameter: 28mm Distance Between Rings: 810mm and 910mm Centre Knurling: Yes Knurling Type: Medium Sleeve Type: Needle Bearings, Brass Bushings & Ball Bearings Max Load/Rating: 1500lbs static rating, 205K PSI Tensile strength. Max suggested load - 120kg for Clean & Jerk / Snatch, 250kg for Squat/Deadlift Warranty: 3 Year Performance Warranty Learn More
  16. Strength Shop Women's Weightlifting Bastard Bar, 15 kg
    €219.99

    Strength Shop Women's Weightlifting Bastard Bar -25 mm Nickel/Phosphorus plated, Sprung Steel Shaft -131.5 cm Length of shaft between sleeves -33 cm loadable length of sleeve -50 mm diameter sleeve, suitable for Olympic Plates Weight: 15 kg Length: 2.03 m Shaft: Sprung Steel Shaft Diameter: 25 mm Distance Between Rings: 910 mm Centre Knurling? No Knurling Type: Medium Sleeve Type: Needle Bearings, Brass Bushings & Ball Bearings Recommended Max Load/Rating: 190K PSI Tensile Strength, 110 kg Max Recommended Load for Clean & Jerk & Snatch Learn More
  17. Klokov Men's 20 kg Olympic Weight Lifting Barbell
    €579.99

    Out of stock

    Ideal for Olympic lifts at any skill level. Experience what it’s like to work with the quality of equipment found on Olympic Games-level platforms. Engineered to meet the strength, durability, and performance demands of world class olympic weightlifting athletes, this barbell is made with the strongest materials, a powerful grip surface, and collars that deliver a precision spin. Precision: Meets all IWF weight and dimension specifications to feel and perform to the standards expected on a competition platform. Strength: Made with the strongest steel on the market at 235,000 PSI, this barbell is a top performer in strength and durability. Performance: A ten needle bearing and bushing design provides a precision spin that is fast, smooth, and effortless. Power: The knurling of this barbell serves as the perfect contact surface to transfer the power of an athlete's grip to their barbell. Qualified for Competition ● Meets all IWF dimension and knurl mark spacing requirements for elite level competition ● Guaranteed weight tolerance of +20 g/-10g ● Blue color coded end cap badge ● Matching resilience band for collar protection and safe storage Uncompromised Metal Work ● Hard chrome finish with a satin luster ● Custom Klokov approved passive center knurling paired with a more aggressive diamond pattern for hand placement Reinforced Collar Design ● 10 needle bearings encased in a stainless steel jacket ● Stainless steel press-fit bushing with a custom embedded retention ring ● Reinforced security with custom milled hemisphere horseshoe collars, a spring retention ring, 2 snap rings, and permanent thread-lock adhesive bonding the end cap into place Guaranteed Quality ● Industry-leading 112 pass/fail quality assurance protocols including: dimensional & weight tolerances, material strength, straightness, finish, knurling, collar spin and construction for guaranteed to durability and strength Specifications ○ Ultimate Tensile Strength: 235,000 PSI ○ Center Knurling: Yes ○ IWF specified knurl spacing: Yes ○ Knurling: Passive diamond pattern in the center, slightly aggressive towards the collars ○ Shaft Diameter: 28mm ○ Total Length: 2200mm ○ Static Load Limit: 680 kg ○ Finish: Hard Bright Chrome ○ Collar Band: Blue ○ Endcap Badge: Blue Cleaning To protect the integrity and feel of your knurling, apply a thin coat of 3-in-One Lock Dry Lube to the knurling, lightly scrub away packed down debris, and remove any remaining oil with a lint free cloth once a week. For an even deeper clean, apply a thin layer of Max Pro Contact Cleaner and lightly scrub with a brass brush. *Do not use chemicals containing ammonia, bleach or acid to clean any components of your barbell. Maintenance To maintain a precision spin on your barbell, lightly spray Fabulous Blaster – White Lithium Grease into the collar once every two months. *Do not use WD-40. Storage Your barbell will last a lifetime if it is stored in a dry environment off of the floor. Learn More
  18. Klokov Weightlifting 20kg Sport Barbell
    €379.99

    If you don’t specialize, neither should your barbell. Engineered to meet the varying demands of the most versatile athletes, this hybrid barbell is ready for whatever the training day calls for, whether the Olympic lifts, deadlifts, or metcon. With both IWF and IPF marks, no center knurl, and a slightly less aggressive knurling than our Olympic line of barbells, this bar is perfect for the lifter who doesn’t want to sacrifice to get the best of all worlds. Product Highlights Versatility: Whether it’s a heavy deadlift, a short and fast burner, or your final attempt on the competition platform, this hybrid barbell design accommodates the demands of any athlete. Strength: ​Made with steel rated at a minimum of 215,000 PSI, this barbell has the perfect mix of whip and strength needed to transition between power and Olympic lifts. Power: A passive diamond pattern knurling and no center knurl serves as the perfect contact surface during high volume repetitions. Performance: A ten needle bearing and bushing design provides a precision spin that is fast, smooth, and effortless. Qualified for Competition ● Combines IPF knurl mark spacing with IWF dimension and knurl mark spacing to accommodate the needs of any competition or training platform ● Guaranteed weight tolerance of +100 g/-50g ● Black color coded end cap badge ● Matching resilience band for collar protection and safe storage Uncompromised Metal Work ● Hard chrome finish with a satin luster ● Less aggressive diamond pattern knurling applied with state of the art machining ● Provides a powerful grip without the risk of tearing during high volume workouts Reinforced Collar Design ● 10 needle bearings encased in a stainless steel jacket ● Stainless steel bushing press-fit with a custom embedded retention ring ● Reinforced security with custom milled hemisphere horseshoe collars, a spring retention ring, 2 snap rings, and permanent thread-lock adhesive bonding the end cap into place Guaranteed Quality ● Industry-leading 112 pass/fail quality assurance protocols including: dimensional & weight tolerances, material strength, straightness, finish, knurling, collar spin and construction for guaranteed to durability and strength Specification ○ Ultimate Tensile Strength: Minimum of 215,000 PSI ○ Center Knurling: No ○ IWF specified knurl spacing: Yes ○ IPF specified knurl spacing: Yes ○ Knurling: Mildly aggressive diamond pattern ○ Shaft Diameter: 28mm ○ Total Length: 2200mm ○ Static Load Limit: 650 kg ○ Maximum Bumper Capacity: 5x30kgs + 1x10kg per side ○ Finish: Hard Bright Chrome ○ Collar Band: Black ○ Endcap Badge: Black Cleaning To protect the integrity and feel of your knurling, apply a thin coat of 3-in-One Lock Dry Lube to the knurling, lightly scrub away packed down debris, and remove any remaining oil with a lint free cloth once a week. For an even deeper clean, apply a thin layer of Max Pro Contact Cleaner and lightly scrub with a brass brush. *Do not use chemicals containing ammonia, bleach or acid to clean any components of your barbell. Maintenance To maintain a precision spin on your barbell, lightly spray Fabulous Blaster – White Lithium Grease into the collar once every two months. *Do not use WD-40. Storage Your barbell will last a lifetime if it is stored in a dry environment off of the floor. Independent review of the 20 KG Sport Barbell from As Many Reviews As Possible: Learn More
  19. Original Texas Power Bar
    €469.99

    There are power bars and then there are Texas Power Bars. Many companies sell power bars these days, but few can withstand the test of time and heavy use like the Texas Power Bar by Buddy Capps. The first Texas Power Bars were made in 1980 by Buddy Capps - Texas powerlifter, expert machinist and innovator. Buddy forever changed powerlifting with his special steel formula and revolutionary sleeve design, and his bars have been used ever since by thousands of powerlifters and powerlifting competitions worldwide. Texas bar owners can be proud to be a part of the long lineage of this classic backbone of the sport. The Texas Power Bar was the first, and arguably still is the best power bar. Barbell Specs: Overall Length: 218.5 cm Shaft Diameter: 29 mm Sleeve Diameter: 50 mm Distance Between Rings: 810 mm Weight: 20 kg Static Load Rating: 680 kg (1500 lbs), 186 000 psi tensile strength. Coating: Rust resistant and non-slip zinc oxide. Knurling: Sharp, with 10 cm center knurling Sleeves are made up of one piece construction with no bolts to lose, and have brass bushings that never require maintenance. This bar is well suited to any powerlifting application. It is one of the strongest, most robust bars on the market, and is virtually maintenance free. The Texas Power Bar is the official competition bar of the Global Powerlifting Alliance (GPA) and the International Powerlifting Organization (IPO) and used in many other federations. Learn More
  20. Original Texas Deadlift Bar
    €669.99

    There are deadlift bars and then there are Texas Deadlift Bars. Many companies sell deadlift bars these days, but few can withstand the test of time and heavy use like Texas Deadlift Bars by Buddy Capps. The first Texas Power Bars were made in 1980 by Buddy Capps - Texas powerlifter, expert machinist and innovator. Buddy forever changed powerlifting with his special steel formula and revolutionary sleeve design, and his bars have been used ever since by thousands of powerlifters and powerlifting competitions worldwide. Texas bar owners can be proud to be a part of the long lineage of this classic backbone of the sport. The Texas Deadlift Bar was one of the first, and arguably still is the best deadlift bar. Barbell Specs: Overall Length: 230 cm Shaft Diameter: 27 mm Sleeve Diameter: 50 mm Distance Between Sleeves: 1430 mm Distance Between Rings: 810 mm Weight: 20 kg Static Load Rating: 900 kg (2000 lbs), 186 000 psi tensile strength. Coating: Rust resistant and non-slip zinc oxide. Knurling: Sharp, deep knurling, no center knurling Sleeves are made up of one piece construction with no bolts to lose, and have brass bushings that never require maintenance. This bar can handle even your biggest deadlift. It is one of the strongest, most robust bars on the market, and is virtually maintenance free. Texas Deadlift Bars are the Official Competition Bars of the Global Powerlifting Alliance (GPA) and the International Powerlifting Organization (IPO) and used in many other federations. Learn More

Grid List

Set Descending Direction

1-20 of 47

Page:
  1. 1
  2. 2
  3. 3