• Strength Shop USA
  • Strength Shop Ireland

Speciality Bars

Grid List

Set Descending Direction

1-20 of 37

Page:
  1. 1
  2. 2
  1. Riot Olympic Safety Squat Bar
    €229.99
    If you do not have a safety squat bar than you are missing out on one of the best training bars there is. Training with this bar is ideal for upper back, lower back, and leg work. The Safety Squat Bar is also great for addressing weak points in the squat. Appr. weight: 22 kg Rated to 350 kg. 26cm distance between handles. 20cm distance between shoulder pads. Learn More
  2. Olympic Cambered Spider Bar
    €249.99
    The Strength Shop Cambered Spider Bar combines our Safety Squat Bar and Cambered Bar into one, with extra long handles. It is a great way to add variation to your Squat training, and works great with box squats. The handles take the strain off your shoulders making this a great option if you have a shoulder injury. The Spider Bar will primarily build your lower body, but it is worth noticing you must engage your upper back much more using this bar compared to regular Safety Bar Squats (and ordinary barbell squats). Black powder coat finish. The handles are attached to the bar by hammering securing pins in place which is much more stable than a screw in handle. Specification: Bar Weight - 32kg Max Load Rating - 400kg Total length - 201cm Length of rackable section - 140cm Tube diameter - 50mm Handle diameter - 25mm Handle length - 76cm *Please see photos on a guide on how to assemble the bar: - Once you open the box you will see the main frame of the bar, 2 x handles, 3 x pads, 2 x securing pins - The handles are labelled A & B which should match up to the frame as per photo - The securing pin has a tapered edge, this is the edge that should be hammered in first - Place the shoulder pads on the handles first - Hammer the securing in through the hole on the main frame into the handle to secure them in place (please note this may take some force) - Once this is done, slide the pad up and it is ready to use Under no circumstances should this bar be dropped. It should be used on the back at all times, and is not designed to withstand repeated impact on the ground. Learn More
  3. Heavy Duty Black Olympic Hex/Trap Bar 1.6m
    €199.99
    Heavy Duty Olympic Hex/Trap Bar 1.6m - Black Oxide Coated The Hex bar might be one of the strangest pieces of gym equipment you will see in the gym today. Don't let that put you off though, it's an excellent addition to any serious strength and conditioning set-up. One reason for this is it's ability to reduce tension on the lumbar spine whilst developing lower body power. It does this by allowing you to step “into” the bar instead of standing behind it. This means you will be able to drive more weight off the floor with your hips and legs in a more upright position without the strength of your back coming into question. The Hex bar is also a useful tool for teaching beginners how to deadlift without the dangers of weak backs and poor flexibility getting in their way, and for tall athletes who struggle to deadlift conventionally. The Strength Shop Hex bar has been improved with the help of feedback from our customers over the years. It now boasts longer sleeves compared to other brands versions which will now hold more plates. The bar has now also been redesigned to fit in most racks, cages or rigs. Approximate dimensions; Overall length - 160 cm Width - 62 cm Height - 14 cm Width between handles - 58 cm Handle length - 28 cm Knurling length on handle - 10 cm Distance between top and bottom handles - 8.5 cm Diameter of handles - 30 mm Sleeve length - 40 cm (32.5 cm is loadable) Weight - 27 kg Coating - Black Oxide Rated to 400 kg Learn More
  4. Heavy Duty Olympic Hex/Trap Bar 2.38m
    €249.99
    Heavy duty Olympic Hex/Trap Bar, with two handles giving the options of pulling from different heights. With long loading pins. Approximate dimensions: Overall Length: 238 cm Width: 76 cm Height: 16 cm Weight: approximately 40 kg Width between handles: 58 cm Sleeve Length: 46.5 cm Diameter loading pin: 50 mm Diameter grip: 30 mm Rated to 400 kg Ideal for hip development when deadlifting, and taking strain off the back. Learn More
  5. 50mm Thick EZ Olympic Curl Bar
    €99.99
    Strength Shop Thick EZ Olympic Curl Bar. Features extra thick 50mm diameter shaft to engage the grip and forearms more for an insane full arm workout. This bar is a must if you are serious about arm training. Overall Length - 120cm Shaft Diameter - 50mm Weight - 12kg Learn More
  6. EZ Olympic Curl Bar, 6.7 kg, Black Zinc Plated
    €49.99
    Length: 1200 mm Thickness: 25.4 mm Weight: 6.7 kg 50 mm sleeves With steel bushing rotating sleeve. Learn More
  7. Multi Grip Thick Curl Bar
    €99.99
    Multi Grip Thick Curl Bar The Multi Grip Thick Curl Bar is a great multi-purpose bar available with the added features of alternately angled handles for a different curl and press variations and grip widths. This bar is great for all sorts of pressing and rowing movements and tricep and bicep work. The thick handles will add extra work for your grip and forearms. Please see below for full specifications. Weight: 9.2 kg Total length: 120 cm Loadable Sleeve Length: 250 mm Sleeve thickness: 50 mm Lenght handles:190 mm Thickness handles: 50 mm Box Sections Size: 54 cm x 23.5 cm Learn More
  8. Olympic Tricep Bar, Black Zinc Plated
    €49.99
    Black Zinc Plated Olympic Tricep Bar with 50 mm sleeves. Weight: 9 kg Total length: 86 cm Length of sleeve: 18.5 cm Total width: 19 cm Distance between handles: 18 cm Diameter of handles: 25 mm Learn More
  9. Olympic Bow Bar, 2.3 m long, 25 kg
    €199.99
    Our Bow bar is designed to help you lift huge weights comfortably. The "Bow" in the bar and added thickness/length help to spread the load right across your back and shoulders making it easier to handle larger weights without the bar rolling around. Unlike a Cambered or Yoke bar it won't change the shape of the movement either. It's not only great for squats, it's shape lends itself perfectly to Hise shrugs, good mornings and lunges as well. Weight: ca. 25 kg Length: 2.3 m Diameter of shaft: 35 mm Diameter of loading pins: 50 mm With rotating sleeves. Recommended maximum load: 450 kg Learn More
  10. Olympic Cambered Bench Press Bar, 18 kg
    €199.99
    Strengthshop Cambered Bench Press bar. The Cambered Bench Press Bar is a great way to add extra range of movement to Bench Press and Rowing movements, as opposed to a straight bar which is limited as soon as it reaches your torso. It also makes the load more unstable hence tougher to control and press off of the chest. The Cambered Bench Press Bar can also add variety to your squats. It's shape forces you to stay tighter in the bottom position of a squat more so than you would with a regular barbell as the center of gravity is shifted slightly forward and becomes unstable if you swing back or forward on the way up. The shift in the bars center of gravity changes your line and shape just enough to make it a slightly different movement to a regular squat. Great for adding a bit of variety and a few new challenges into any training program. Length - 220cm Shaft Diameter - 30mm Weight - 18kg Rated to - 250 kg Learn More
  11. Olympic Cambered Bar, 25 kg
    €199.99
    The Strengthshop Cambered Bar. Never heard of it? Well that's probably because it's one of the most underrated and underused bars in the fitness industry. If a gym has a Cambered bar then you know they don't skip leg day. Originally used by Powerflifters to help increase their squat numbers it's now making its way to the rest of the fitness world. The Cambered bar is the perfect bar for adding variety to your squats. It's shape forces you to stay tighter in the bottom position of a squat more so than you would with a regular barbell as the center of gravity is shifted slightly forward and becomes unstable if you swing back or forward on the way up. The shift in the bars center of gravity changes your line and shape just enough to make it a slightly different movement to a regular squat. It can also be used to the same effect with the Bench press, making the load more unstable hence tougher to control and press off of the chest. Great for adding a bit of variety and a few new challenges into any training program. Weight: 25 kg Diameter of shaft: 50 mm Sleeves to collar: 310 mm Rated to 400 kg Please see secondary image for full spec/drawing. Learn More
  12. Olympic Cambered Bench/Row Bar, 20 kg
    €199.99
    The Strengthshop Cambered Bench/Row Bar is a great way to add extra range of movement to bench press and rowing movements, as opposed to a straight bar which is limited as soon as it reaches your chest when pressing, or the bench when performing seal rows. In addition to the camber, this bar features variable width neutral grips, which takes a considerable amount of pressure off the shoulder joint during pressing movements. This makes this bar an ideal tool for rehab work when strengthening and mobilizing injured shoulders. It´s also a great way to add some variety to common movements and keep your muscles guessing from one training session to the next. Makes a nice complementary bar to our cambered bench press bar, which features a similar camber but on a straight Olympic style barbell. Total length: 205 cm Sleeve length: 36 cm Camber at opening: 54,5 cm Camber at top: 35 cm Handle spacing (center to center): 60 cm and 77 cm Handle length: 21 cm Handle diameter: 28 mm 50 mm Olympic sleeves Weight: 20 kg Learn More
  13. Olympic Swiss Bar, 10 kg
    €129.99
    The Strengthshop Swiss bar, provides the facility to work with a completely neutral grip and three different grip widths for a variety of pressing and rowing exercises. Ideal for those with shoulder problems and anyone looking to add some variety into their training. Suitable for a variety of lifts, including: Bench press Tricep extensions Hammer curls Bent Over Rows Weight: 10 kg Length: 2100 mm Rated to: 200 kg (static weight) 400 mm sleeves Diameter loading pin: 50 mm Handle spacing: 160 mm/360 mm/560 mm Handle diameter: 31 mm 1300 mm collar to collar Learn More
  14. Olympic Football Bar
    €129.99
    Football bar, providing the facility to work with a neutral grip, ideal for those with shoulder problems, and anyone looking to add some variety into their training. The angled handles alter how the shoulder joint functions during the press movement, and results in a more neutral grip, which is designed to be easier on the shoulder joint. Their 50 mm diameter eases strain on the wrists as well. This bar is designed for rehab and/or assistance work hence we advise using lighter weights, however the recommended max load is 200 kg. Weight: 10 kg Width: 190 mm 50 mm knurled handles Diameter loading pin: 50 mm Length: 2100 mm Length sleeves: 400 mm Length centre section: 220 mm Length of each handle section: 46 mm Distance between the collars: 129.5 cm Distance between collars and handle part: 13 cm Distance between inner handles: 35 cm Distance between middle handles: 56 cm Distance between outer handles: 78 cm Suitable for a variety of lifts, including: Bench press Tricep extensions Hammer curls Learn More
  15. Solid Steel Swiss Bar, 27 kg
    €199.99
    The Strength Shop Solid Steel Swiss bar, provides the facility to work with a completely neutral grip and three different grip widths for a variety of pressing and rowing exercises. Unlike our standard Swiss Bar, this is solid steel - it weighs heavier and can handle a lot more weight! Ideal for those with shoulder problems and anyone looking to add some variety into their training. Suitable for a variety of lifts, including; Bench press Tricep extensions Hammer curls Bent Over Rows Weight: ca. 27 kg Overall length: 210 cm Width: 19 cm Depth: 5 cm Loadable sleeve length: 40 cm Diameter handles: 35 mm Length of middle box section: 82 cm Learn More
  16. Solid Steel Football Bar
    €199.99
    Price incl. VAT, excl. shipping Strength Shop Solid Steel Football Bar The Football Bar, originally designed to be used by American Football players with/recovering from shoulder injuries, to allow them to continue to bench and press. Unlike our standard Football Bar, the Solid Football Bar is made of solid steel - it weighs more and can handle a lot more weight! The angled handles alter how the shoulder joint sits during the press movement (elbows tucked in on the bench press), and results in a more comfortable grip position which creates less pressure on the shoulder joints. Their 50mm diameter eases strain on the wrists as well. Approx Weight - 27kg Dimensions: Overall length: 210cm Width: 19cm Depth: 5cm Loadable sleeve length: 40cm Handles: 50mm diameter Length of handle box sections: 47cm Gap between handle box sections - 10cm Distance between inner handles: 35 cm Distance between middle handles: 56 cm Distance between outer handles: 78 cm Learn More
  17. 50 mm Thick Bar/Axle
    €129.99
    This bar is an essential piece of kit for strongman/strength training at any level. Great, versatile bar which is perfect for grip training, and also just adding in a bit of variety to your training. Knurled at either side of the shaft + centre knurling. Sleeves do not revolve. This bar is one solid piece with sleeve plates to stop plates sliding up the bar. Length: approx. 2.1 m Weight: approx 20 kg Diameter: 50 mm Diameter loading pin: 50 mm Rated to: 450 kg Learn More
  18. Competition Solid Steel Axle, 50 mm thick, 36 kg
    €169.99
    This solid steel 50 mm axle is a beast. 36 kg in weight its ideal for heavy axle training. The shaft is kurled from either side and it comes with a centre knurling too for squatting. Knurled at either side of the shaft. With centre knurling. Sleeves do not revolve. Length: approx. 2.2 m Weight: approx. 36 kg Diameter: 50 mm Diameter loading pin: 50 mm Rated to: 450 kg Learn More
  19. 60 mm Axle, Black Oxide Coated, 25 kg
    €149.99
    This axles handles are thicker than the olympic plate loading pin! 60 mm thickness will challenge your grip and technique with deadlifts, overhead lifts and so on. Knurled at either side of the shaft. No centre knurling. Sleeves do not revolve, bar is one solid piece with sleeve plates to stop plates sliding up the bar. Rated to 450 kg Length: ca. 2.1 m Weight: approximately 25 kg Diameter bar: 60 mm Diameter loading pin: 50 mm The Strengthshop 60mm axle will be used at the 2019 US Strongman Nationals in Columbus, OH. Learn More
  20. Circus Dumbbell, 20kg
    €59.99
    Thick handled Circus Dumbells Single-handedly stronger! Rooted in tradition, the challenge of hoisting a weighted dumbbell from the floor to overhead has been a worldwide phenomenon for over a century. Such feats of strength make for an impressive show, which is why this movement is still used in many strongman competitions today. This is a great tool for combining the development of upper body, core and grip strength and should not be overlooked by any lifter! Our circus dumbbells come in a variety of sizes, ranging from 20kg up to 78kg. Details: - 60mm diameter steel handles with cast iron globes - Single mould cast with black coating Learn More

Grid List

Set Descending Direction

1-20 of 37

Page:
  1. 1
  2. 2